CME UF80 / WiDI (wireless midi) version.    88-key hammergraded keys keyboard with expansionslots.


Cons:  Product quality. Good and Really Bad units are out there.  UF series seems better than U (first). 2 Keys that sound strange on mine (hits something inside) but thats seems to be a a common "problem" ;) 


Pro: Can be picket up for a low fee 2:nd hand (make sure all keys work first).  Expansion slot, and cheap cards as most sell them from overstock. 
Expanded with. 192Khz sound card.  (terratec phase 44).


UPDATE FIRMARE

Latest firmware as of Aug 2011 seems to be 2.00.   I had 1.07 before that.
Power on while holding exit + enter = Show current firmware 
Power on while holding F1 + F3 = Put UF in update mode (UPd shows on the display) 
Program used: Ubrain-beta 1.0 on XP/32.  Never got it worked/recognised in a virtuell enviroment, ie parallells on mac)


Widi (wireless midi) works natively via plug n play on both OSX 10.6.8 and XP and Win7. 
Audio (UF400 firewire):  XP = Vista driver 2.44,   Win7=vista driver 2.44 (32bit),  MAC osx=CoreAudio no drv needed.
The mixer panel under osx use rosetta, so from Lion and up, no goo.     
Terratec Phaze 4


UF80 
Weight 25 Kg
Power: 11W with expansion card.  (hugre power adapter, but works from powered USB too! )

Gmail / Calendar  - syncing to Android and iOS devices (3.x/4.x/5.x)

How To:  Show/Add "shared google calendar" on iOS/iPhone.
2 Steps.
1. Add gmail account as an exchange account (don't click gmail account)
2. Open webbrowser from phone and go to:  m.google.com/sync

1. (add gmail account as an exchange account)

- Settings - Mail, Contacts, Calendars

 - Add Acount (Microsoft Exchange, not Gmail!!)

Enter you name/settings

Email:  name@gmail.com 

Domain (leave empty)

Usernamn = full gmail account with included domain (asdf@gmail.com)

Password = you password

Press next.

Server = m.google.com

done!

2.
Start webbrowser (Safari), go to URL: m.google.com/sync  

log in with your username/password, 

Select device that you want to sync (if you have several iDevices, they are being shown here, iPad, iPhone etc)

Select the shared calendar you want to sync.

above webpage requires english language in webbrowser. Click change language from page, switch to english and you should be redirected back.  
The sync page shows up from several mobile devices.

TAC 2222  Regulator.

Introduced in the 90's, the TAC 2222 is a heating and water regulator.  Simple operation, 99 parameters (settings) with 5 buttons for complete operation.

Parameter 1-15 = up/down key.
Parameter 16-99 = press up/down simultaneously.
Changing value = press filled/empty bar to accept.


Limited number of external connections, and control.
4 reference thermometers. External thermometer can be replaced by GSM/3G receiver and therefore the whole unit can be remotely controlled, or by weather forecasts.

Common functions:

• Automatic regulation of heating curve (X/Y - 3 points)  
• Weekly programmable/7days,  with night setback (i.e lower temperature during nighttime)
• Weekend programs (water and heating)
• Sloping night setback and day/pre heating.  (i.e night setback is dependant of outdoor temp)
• Pumpcontrol and daily "exercise".   (i.e pumps run for 5 minutes every monday during summertime, when system might be shutdown due to hot weather = minimizes pump failure/corrosion)
• Alarm functions.
• Water control (heating)     
• 3W power effect. Memory is stored in memory for 48 hours during power outlets. 

0.7 Kg
Dimensions 144*96*96mm

Click for bigger picture.

Menu walkthru at:
http://www.youtube.com/watch?v=20jh-w0nKLY

iOS 5.01 unlock/jailbreak and preservation of baseband.

1. Redsn0w (win/mac). +preserves installed software, all apps is kept on device after jailbreak.

2. Ph0nagetool. Jailbreak/modifies iOS file on computer, then uploads to device. +keeps baseband, so unlock procedures is available for locked phones. All previously downloaded apps is replaced by uploaded/modified iOS file.

If Cydia doesn't work after redsnow (jailbreak), run Redsnow again with other options (reinstall cydia). White icon common, boot tethered choice from cydia might be a remedy.

Gevey ultra

iPhone 4 (baseband 04.10.01) operator unlock under iOS 5.01

Phone locked to one operator, but changing to another. As of Jan 2012, only Gevey Chip works, no unlock software procedure is available. Microchip and template placed under real simcard, and requires slightly modified sim tray with place for chip/gevey card. Included with purchase of Gevey Card.

Phone locked to operator (tre/sweden). Trying out a Gevey Ultra (original chip, not original manufacturer) but should be very similar.

Both original chip aswell as copies exists on the market.

Copies sometimes use 5v chip (run hot, not adviced), Original Gevey (and gevey ultra) runs on 3Volt. Original chip no starts with F9xx (se picture)

Unlock procedure.

1. Settings - Phone - Sim Applications - - Click Gevey...

2. Click Accept (big green button), wait 15 seconds according to instructions

3. Call 112, hang up within 2 seconds (so call wont go thru)

4. Enter settings - enable airplane mode (wait for sim error message).

5. After sim error message, disable airplane mode = Operator unlock in progress.

Unlock procedure ~1.5 minute.

As of Jan 15 2012, nu automatic unlock works with my card. Furiousmod 1, 1,1 and 2.0 doesn't work, and when FuriousMod is installed, the manual unlock procedure doesn't work anymore (menues doesn't show). Uninstall FuriousMod, and manual unlock works again.

Original Gevey Chip, but not original sim card bought from applenberries or other seller. Should be close to original, maybe something else that is wrong. Never tested under 4.3x

F981m BFOF 122+ (stamped on chip)

Display shows E (edge) or 3G connection speeds. If no 3G, add APN settings manually (requires reboot). comviq/tele2 (sweden) = APN = surf.telef2.se (requires reboot)